Page 573 – GadgetByte Nepal

Realme Buds Air Review: Uninspiring, Yet Impressive

Nikhil Shrestha

-

October 4, 2020

Realme Buds Air Review: Uninspiring, Yet Impressive

Ever since Apple made skipping the headphone jack look “hip.. cool… laid-back” and introduced its AirPods brand of TWS earbuds, it was only a matter of time that all the other players in the industry followed suit. And back in December of last year, Realme launched the “Buds Air” which was meant to provide a premium audio experience with a couple of flagship features – on a budget asking price (at least when comparing against TWS from other manufacturers). But just how good is it? Let’s find out in this review of the Realme Buds Air TWS earbuds.

Realme Buds Air Specifications:

Dimensions: 51.3H x 45.3W x 25.3D-mm (case)
Weight: 4.2 grams (each earbud); 42.3 grams (charging case)
Driver: 12mm Audio Driver; LCP Advanced Multi-layer Composite Diaphragm
Connectivity: Wireless (Bluetooth v5.0, Google Fast Pair); 10 meters range
Bluetooth profiles: HSP/HFP/A2DP/AVRCP
Chipset: Custom R1 chip
Frequency response: 20Hz – 20kHz
Music time: 3 hours playback, 20 hours (with charging case)
Audio codec: AAC, SBC
Control: Touch (customizable via the app)
Battery capacity: N/A (each earbud); 400mAh (power case)
Charging time: 120 minutes (with charging case)
Noise-canceling: Yes, Dual-mic Environmental Noise Cancellation (ENC)
IP rating: No official dust, water ingress protection
Power case charger: USB Type-C, Qi Wireless Charging
Color: Yellow, White, Black
Companion app: Realme Link
Price in Nepal: Rs. 6,999

Realme Buds Air Review:

Design

An uninspiring AirPods-like design with a glossy finish
Half in-ear buds, so may not fit all ears
Squarish charging case with a glossy finish

To be perfectly candid, the Buds Air look like a poor man’s AirPods. I mean – you can clearly see the lack of enthusiasm and innovation in its design language. From the charging case to the earbuds themselves, it looks so similar that Realme should feel lucky that it doesn’t sell the Buds Air in the US. Otherwise, the US Customs would unmistakably seize them as counterfeit AirPods as well. Anyhoo, if you’re someone who prefers such flat, stemmy design, this will be a cup of tea but as someone who repulsive to this form-factor, fair to say I’m not a fan.

Realme Buds Air has a “one fit for all” half in-ear design, meaning you can’t customize them to fit optimally inside your ears. There are no silicone ear tips to choose from so naturally, it might not fit the best to every ear. In my experience, these earbuds were slightly bigger and would frequently slip out my ears when walking, jogging, and even when grooving to the tunes. Because of this, I found myself having to adjust the Buds Air into my ears every now and then. Although Realme says that it has performed hundreds of real-world tests to achieve high compatibility with the auditory canal, the median calculation definitely doesn’t conform to each ear.

Lightweight with a glossy finish

Thankfully, these aren’t all that heavy and from that perspective, feel comfortable inside the ears. Weighing just 4.2 grams per earbud, Realme says that it is lighter than a piece of A4 paper that scales to approximately 4.3 grams. Moving on, Buds Air has a plastic build all over with a glossy finish. As a result, it is extremely prone to finger smudges sticking to the buds’ surface when you put them on, take ‘em out, or trigger control. There’s also a filter in each earbud to prevent ear waxes from getting in, which is a nice thing to have.

But, Realme has skipped an official IP rating on the Buds Air altogether. That’s especially disappointing considering how much cheaper TWS earbuds from other brands like OPPO, Xiaomi come with IP certification for both dust and water ingress. Heck, even Realme’s cheapest TWS – the Buds Q comes with an IPX4 rating. So, seeing this fairly premium earbuds void of one feels disheartening. Having said that, it should most definitely survive sweats or minor splashes, although I’d be very careful taking them in rain.

Charging Case

Like I said earlier, the charging case is a replica of Apple’s AirPods/2 as well. This one has a plastic body with a glossy finish and feels quite nice to hold. However, with the earbuds inside, Buds Air’s charging case gets a little heavy at 42.3 grams. Just like the earbuds, this is prone to smudges as well. On the other hand, the hinge is solid and gives a nice and strong “click” every time you close it. Additionally, I found that the magnets holding the earbuds inside the case is incredibly strong and will come off only when you really force it off.

Upfront, you’ll notice the LED battery indicator and a dedicated button for pairing. The LED has a sharp glow and flashes three different colors – red for low, yellow for medium, and green for a high charge level. Similarly, there’s the USB-C charging port at the bottom of the case while Realme Buds Air also supports Qi wireless charging. It’s incredibly rare that a relatively inexpensive pair of TWS earbuds incorporate wire-free charging so kudos to Realme for being able to pull this off. Naturally, you’ll have to buy a wireless charger separately. The company had teased a 10W wireless charger of its own during Buds Air’s launch-event which was finally made available in August 2020 at a price tag of around $12 (INR 899).

Pairing

Bluetooth v5.0 wireless connection
10 meters / 30 feet effective range
Google Fast Pair Service (GFPS) enabled

Getting to pairing, it comes with Bluetooth 5.0 and 10 meters (30 feet) of effective range. Realme Buds Air was able to maintain a strong connection when I moved across the room with my phone placed somewhere else. Yet, it couldn’t maintain the connection when I would shift between the floors. For first-time-pairing, you’re gonna need to press the pair button on the case for a while (about 3 – 5 seconds) to make the buds discoverable for Bluetooth-enabled devices.

Furthermore, Realme Buds Air is one of the handful of TWS earbuds in the market to feature Google’s Fast Pair Service (GFPS). This protocol uses Bluetooth Low Energy (LE) and the phone’s location to discover and pair Bluetooth devices nearby. Thanks to GFPS, after pairing these earbuds for the first time to a phone, tablet, and such, subsequent pairings will be almost instantaneous and the connection will be established almost immediately after opening the lid of the case.

Control

A touch-based capacitive sensor on each earbud
Double/triple-tap for playback control/trigger voice assistant
Supports wear detection to automatically pause/play music

Now let’s move on to the controls. Just like other TWS of this design, Realme has embedded a capacitive touch sensor on each earbud with a double/triple tap mechanism to trigger different actions. Considering its price, I would’ve liked the Buds Air to feature a volume control option by sliding up/down the stem just like on the OPPO Enco Free but it’s not there.

You can also customize the actions using the Realme Link app. In my case, I’ve set the Buds Air to play/pause the audio upon a double-tap on either side, triple tap on the left to go back to the previous track, triple tap on the right to skip the currently playing audio, and touch-&-hold either side to summon the voice assistant. Unlike the Buds Q where you needed to be extremely delicate with how you press against the earbuds, these work like a charm.

Wear-detection

In fact, Buds Air can recognize commands even to quick taps. But sometimes, it does confuse a triple-tap with double, so you’re better off going a little slow. Additionally, there is also an input lag of about 300 – 400ms which I must admit was a little uncanny experience at first but I quickly got used to in within a couple of days. Realme has also included an optical sensor which facilitates wear detection on the Buds Air. With this, it can automatically pause/resume audio depending on whether you’ve taken the earbud(s) out of your ear, or put them back in.

During my test, it worked like a charm almost every time. Interestingly, I found that you can trick the optical sensor into controlling the playback by enclosing the earbuds between your fingers, simulating the way it fits inside an ear. Not much of a deal-breaker but an interesting discovery nevertheless. Also, it takes almost half a second for the sensor to detect if the earbuds are inside your ears or not.

Audio Quality

12mm Large Sound Driver
LCP advanced multi-layer composite diaphragm
20 Hz – 20 kHz frequency response
119ms super low-latency gaming mode
Dual-mic with Environmental Noise Cancellation (ENC)

Time to talk about the audio quality. Here, the Realme Buds Air comes with a big 12mm sound driver and multi-layer composite LCP (Liquid Crystal Polymer) diaphragm. It has an audio frequency range of 20 Hz – 20 kHz and supports the standard AAC, SBC audio codec with HSP/HFP/A2DP/AVRCP Bluetooth profiles. The company says that it has implemented a custom Dynamic Bass Boost (DBB) solution for delivering a rich, dynamic listening experience alongside a powerful bass.

In my review, I was quite impressed with the audio quality from Buds Air and was honestly a little surprised that Realme was (for the most part) able to keep its promise, considering how the Buds Q was just a heap of disappointment. The volume can get quite loud and it is able to produce clear vocals and quite a thump of bass too. However, in 100% loudness, the audio gets unpleasant as the vocals sound sharp and the treble feels way too overpowering as well.

In “Come on Eileen” by Dexys Midnight Runners, the instruments tend to come off a little flat and even the drumbeats are mildly overshadowed by other instruments like the banjo in the first minute of the song when listening on Spotify (under “Very High” streaming quality and “Normal” volume level). But, listening to the same song on YouTube, the drumbeats sounded a little better although the mid and high frequencies got a little shrieky.

Sometimes struggles with high-frequency sound reproduction

Likewise, I listened to the “Westworld Intro Theme” by Ramin Djawadi on Realme Buds Air during my review. This soundtrack is low and high-frequency audio and unfortunately, I noticed frequent “buzz” throughout the music, especially in parts composed with high frequencies using cello and other equipment. So, although Realme says that it has optimized the frequency response on the Buds Air within 100 – 2000 kHz range, that’s not seen in practical usage. Also, in the first 10 seconds of Hans Zimmer’s “Beautiful Lie”, the audio completely limps and sounds inconsistent.

MACINTOSH PLUS’ “Lisa Frank 420/Modern Computing” sounded a little all over the place although it was nothing that alarming. The slow-sampled vocals from Diana Ross’ “It’s Your Move” in the song sounded mellow and almost intoxicating. Classic rock songs like “Highway 61 Revisited” by Bob Dylan sounded a little too sharp but when lowering the volume sounded extremely pleasant and Bob’s voice was very easy to make out between the guitar and drums (although this one’s not that much of a challenge, to be fair).

119ms Super Low-Latency Gaming Mode

Like other TWS earbuds from Realme, the Buds Air also boasts the Super Low-Latency Gaming Mode that it reduces the delay from 243.8ms to 119.3ms. During my test, I didn’t notice any lag when watching videos under both normal and low-latency mode. But as the name implies, it is meant for smoother gameplay on top of enjoying video content. For this, I simultaneously compared Buds Air’s 119ms latency against my Philips SHE3000BL/10 wired earphone.

On a related note, turning on the low-latency mode is fairly simple. All you gotta do is press both earbuds for about 2 seconds or more and you’re greeted with audio of a car revving up. During my review, I played Call of Duty: Mobile and Mobile Legends Bang Bang and switched between Realme Buds Air and the wired earphone to test out the audio delay. Using the “Earbuds Delay Test” app, I recorded the latency of Buds Air in both regular and 119ms mode.

Earbuds Delay Test

1 of 2

Here, Realme’s claims were quite accurate and corroborated well with my test. On average, I recorded around +270ms latency in regular and +127ms in the low-latency mode. While that is impressive and all, it is actually quite slow for competitive gaming in RPG & FPS games. I would hear the in-game enemy’s footsteps, bullets firing from my gun, minion attacks, etc. just slightly late – but this was enough to crumble the gaming experience altogether. Just like the Realme Buds Q, I didn’t have high hopes from Buds Air’s 119ms mode and that reflected in real-life use. I must say the latency is noticeably lesser in the gaming mode but it’s still enough to tick you off incorrectly.

Call Quality

Moving on, unlike the latency, the call quality on Realme Buds Air is fantastic. It has two microphones altogether – one near the earpiece and one at the bottom of the stem. Additionally, these use Environmental Noise Cancellation (ENC) technology to reduce background noise for clear calls. And in my test, I found Buds Air’s call quality to be excellent. The microphone picks up the user’s voice incredibly well and got no complaints from people in the receiving end. Besides clarity, the audio gets quite loud as well. All in all, the dual-mic plus ENC combo works wonders in terms of its call quality.

Battery

400 mAh (charging case)
USB-C, Qi wireless charging

Regarding the battery, Realme has been hush with Buds Air’s individual capacity and specifies the capacity of the charging case only – 400 mAh. In the product support page, the company claims “17-hour battery life for non-stop listening” which is wildly misleading and couldn’t be farther from the truth. That figure – the 17-hour playtime is only when combining power from the charging case, meaning the “non-stop” part in that claim is entirely false. The rated playback time of just the earbuds is just 3 hours. From that, I assume the earbuds have a 30 – 40 mAh battery each.

The mere 3 hours of battery life is just not enough for someone like me who puts on the earbuds for way more than that. As a result, I managed to squeeze out about 2.25 – 2.5 hours of listening time at approximately 80% volume level with the low-latency mode turned on. Using the USB-C cable provided inside the box, you can juice up Realme Buds Air’s case in around 1 hour 45 minutes to 2 hours. And like I mentioned earlier, this one also supports wireless charging.

Conclusion

So let’s wrap it all up. Realme Buds Air is a decent pair of TWS earbuds with great audio, excellent call quality, and some premium features like wireless charging and wear-detection. My subjective opinion on its design is that it could and should’ve been better but if you can make peace with the design, that’s another point in the bank for the Buds Air. The advertised 119ms latency doesn’t fare well with competitive gaming so this shouldn’t be your choice if you’re going to use it exclusively for this purpose. Nevertheless, my biggest concern with it is the battery life as the minuscule 3 hours of continuous playback is just not enough for me.

Songs referenced in the Realme Buds Air review:

Realme Buds Air Review: Pros & Cons

Pros:

Comes with Google Fast Pair Service (GFPS)
Supports wireless charging as well
Customizable controls with wear-detection
Decent bass and an overall pleasant audio quality
Excellent call quality with loud & noise-free audio

Cons:

Outdated AirPods-like design
119ms low-latency mode isn’t ideal for gaming
A bit inconsistent sound in high frequency
Just 3 hours of continuous playback time
No IP rating of any sort

Redmi Earphones Review: Hi-Res Audio On A Budget

GadgetByte

-

October 4, 2020

0

Redmi Earphones Review: Hi-Res Audio On A Budget

Xiaomi Nepal launched the Redmi Earphones in Nepal as a part of the “Celebrate Dahsain with Mi” campaign for the upcoming festive season. The main selling point of the earphones is that it brings Hi-Res audio support on a budget under Rs. 1,000. Let’s check out how the Redmi Earphones performs in real-life in our detailed review.

Redmi Earphones Specifications:

Design: Aluminum main body, anti-earwax earplugs
Weight: 13 grams
Drivers: 10mm Dynamic driver; 32 Ohm; Hi-Res Audio certified
Connectivity: Wired (3.5mm headphone jack)
Wire: 1.2m Y-shaped wire
Control: Single Multi-function Button
Water resistance: No
Microphone: Yes, built-in
Color options: Black, Blue, Red
Price in Nepal: Rs. 749
Buy Here

Redmi Earphones Review

Design

There is nothing exciting about the design of the Redmi Earphones. The earpiece is made up of Aluminum with a shiny finish to it. Other than that the whole earphone looks ordinary. Redmi has included a 1.25m Y-shaped cable. It would have been better if the company had opted for braided cable instead. Also, a strap to adjust the length would have been appreciated.

The point where the wire enters the earpiece is actually reinforced to avoid easy wear-and-tear. While it does add to the durability, it is not as rigid as the one on the Redmi SonicBass Wireless Earphones. But again, the latter is more at double the price of the Redmi Earphones so we can’t really argue here. Also, adding to the durability is the 90-degree headphone jack.

Control

The one thing where Redmi could have improved is the controls. With the Redmi earphones, you get only one of them. The button itself feels cheap. Depending upon how you press it, the button feels different. The upper part of the button has greater space to travel and it’s not hard to notice it when you press the button from there. The bottom part of the button feels rather jammed and pressing the button from there feels quite uncomfortable.

One button to get everything done

The single press of the function button will play/pause the current track while a double press will skip to the next track. A triple press will go back to the previous track. Similarly, calls are received and rejected via a single press and a long press, respectively. When in a call, you can use the function button to mute the call.

Compatibility Issue

Though the function button seems like it can get everything done by itself, it is useless if you are using it on a Windows machine. While I have not tested it on an iOS device, Redmi says that it is compatible with iOS too, although the functionality is rather limited. Similarly, even though the controls functioned like how it should with the YouTube Music (successor to Google Play Music), the triple tap did not work with Spotify.

Audio Performance

Hi-Res Audio

The main selling point of the earphone is the High-Resolution Audio. High-Resolution (or simply, Hi-Res) audio technology was first introduced to improve the quality of digital sound that performed poorly compared to music from CD back then. The idea was to make digital sound perform better than its CD counterpart by using a higher sampling rate.

In simple words, Hi-Res audio retains better details than ordinary music. But to enjoy it, you need to have a compatible audio accessory, which in this case is the Redmi Earphones, and Hi-Res audio files to listen to. The latter is harder to find than most people think. YouTube Music maxes out at 256kbps. And even the highly acclaimed streaming services like Spotify and Apple Music’s offering are far from the lossless audio that the Hi-Res audio promises to deliver.

The actual test

For this review, I tested the Redmi earphones using Spotify with the streaming quality set to Very High (~320kbps). To avoid any further compression of music, I turned the normalization off.

The sound quality was actually good considering the below Rs. 1000 price tag. The vocal sound smooth and well-separated from all the instruments going on behind. It even makes sure the background vocals are heard. Songs like the “Hymn for the Weekend” is a delight to hear. It even does justice to Chester’s verses on “She Couldn’t”, which gets overshadowed by instruments on other earphones / TWS that I have used. Similarly, I had the best experience listening to “all the kids are depressed” by Jeremy Jucker. The pre-chorus hits different with this earphone on. All in all, I had a good time going through my playlist.

Verdict

The launch of Redmi Earphones comes as a surprise in a time where smartphone brands are more focused on conquering the budget TWS market segment. Priced well at Rs. 749, the Redmi Earphones doesn’t have the flashy design and color that you would expect on accessories these days. But still, at that price, I would have appreciated a braided cable. Similarly, the controls are not that great – considering multi-device support. However, it offers Hi-Res audio support which is something unheard of in this price tag. The sound quality is quite good too, even better than some other higher priced TWS.

Songs referenced in the Redmi Earphones review:

Redmi Earphones Review: Pros & Cons

Pros:

Hi-Res audio on a budget
Right-angled connector
1.25m wire is long enough
Six months warranty

Cons:

No braided wire
Control needs to be improved

Redmi SonicBass Wireless Earphones Review: This one goes on and on…

GadgetByte

-

October 4, 2020

0

Redmi SonicBass Wireless Earphones Review: This one goes on and on…

When it comes to budget TWS, we can’t ignore the fact that Redmi’s AirDots reigned as a public favorite in Nepal for quite some time. However, the same can not be said now as budget earphones from other brands have flooded the market. Now, Redmi is also focusing on the neckband style earphones. The new Redmi SonicBass Wireless Earphones is the company’s first neckband style earphone in Nepal. It is also the first Redmi product to have launched in Nepal before anywhere else. Read this review till the end to know what I think of the Redmi SonicBass Wireless Earphones.

While Redmi has not revealed the true specs of the Redmi Sonic Wireless Earphones, let’s check out the features that the company has included in the Redmi SonicBass Wireless Earphones.

Key Features:

Superior Sound with Pro Bass
21.3 grams
Neckband design
Bluetooth 5.0
Voice Control
Environmental Noise Cancellation
IPX4 Certification
Six months Warranty
Price in Nepal: Rs.2,099

Redmi SonicBass Wireless Earphones Review

Design and Comfort

Neckband style headphone with plastic + rubber material
Earpieces attach magnetically

From a distance, the new Redmi SonicBass Wireless Earphones may look similar to the Mi Wireless Neckband. But, the former has a slimmer curve. The curve looks to be made of up rubber. The surface of the neckband that rests on the neck is rounded while the other side is plain flat. Redmi has used plastic for the end of the curve. The plastic has a matte finish and it is where all the buttons and ports are located.

The earpiece looks to be made up of hardened plastic. The part that faces the inside of your ear has a glossy finish to it. Similarly, the earpiece has a soft tip that goes into the ear. The box offers three different sizes of tips for users to choose from.

The back of the earpiece is made of a magnetic substance and it binds the two earpieces together when not in use. Unfortunately, it doesn’t turn on or off the earphones automatically. The wire does not feel like a premium one but that’s okay considering the price of the earphones. The spot where the wire meets the earpiece is reinforced with hard material for durability.

The earphone weighs around 21.3 grams and most of the time, you won’t notice the band around your neck. Unless you decide to wear it during your workout sessions. I don’t recommend going out jumping with these earphones on. That being said, this earphone is IPX4 rated and thus it will be able to withstand sweat and minor splashes, in case you decide to use it during workouts.

Pairing

Bluetooth 5.0 Wireless Connection
Dual-Connection

Being a wireless earphone, the SonicBass Wireless connects to your music player using a Bluetooth connection. It supports Bluetooth 5.0 transmission with a theoretical range of 10m. To pair it, first, you need to turn on the headphone by pressing the power button for a second. Once you hear the voice prompt, go to the Bluetooth section of your device, search for Redmi SonicBass Earphones, and hit connect. It supports automatic connection with a previously paired device.

The best part is the earphone can connect to two devices simultaneously. If it recognizes a sound being played on the second device, it automatically switches devices. At times, it can get annoying as a notification on the secondary device can disturb your music experience.

Control

Dedicated buttons: Multifunction button, Volume up, Volume down

The controls reside on the right side of the neckband. There is a volume up, a volume down and a multi-function button. The multi-function button can play or pause the content. Upon long pressing, it acts as a power button as well. The volume buttons can also be used to skip tracks.

When Redmi Nepal first introduced the SonicBass Wireless Earphones, it mentioned that the earphones had Voice Control. It provides a way to summon your phone’s default voice assistant remotely when the phone isn’t in reach. If the device is connected to the earphone, double licking the multi-function button will summon the voice assistant.

Performance

Redmi has been tight-lipped about the technical specs that can help potential customers compare it with other wireless earbuds. The only thing mentioned is the Pro Bass, but besides this, there is no detail on what it is and what it does.

Still, the bass on the SonicBass earphones is a decent experience. However, at times you will wish the bass were a little punchier. Such was the case when listening to “Bandish” by YoungStunners. There were times when the instruments would be overshadowed the vocal. I experienced it when listening to “She Couldn’t” by Linkin Park. Similarly, I found some part of the vocal at the end of Our Last Night’s cover of “hot girl bummer” inaudible.

Low-pitched vocals sound better than the high-pitched ones. However, if you like listening to pop songs, the earphones won’t disappoint you. I could not find anything significant to complain about the earphone while listening to songs like Monsters, Ice Cream, and my ex’s bestfriend.

As far as the quality of the calls goes, it is satisfactory at best. You will have to make sure you are speaking with the mic facing towards you. The person at the receiving end will certainly complain about all the external noise that the microphone catches. There was one instance where I had to change the earphones when my friends on Discord complained about my sound being a little inaudible.

Battery

120 mAh battery

The Redmi SonicBass Earphones feature a 120mAh battery. The company claims that it can last up to 12 hours of continuous playback. While I wanted to test the claim, 12 hours is a lot of time. For my review of Redmi SonicBass Wireless Earphones, I tested it for six hours straight. Even then it had a significant amount of juice left to use for another session. Redmi says it takes about 2 hours to charge the headphones, that is, with the 2.5W charger (5V, 0.5A). But Redmi doesn’t ship charger with the earphones in the first place. I used a 5W charger (5V, 1A) and it charged the earphones in around 100 minutes.

Conclusion

Redmi SonicBass Wireless Earphone is one of the cheapest wireless neckbands in the market. And sound-wise, it is on-par with other similarly priced TWS earbuds. The bass is decent for the price, and the instruments are clear for the most part. However, the earphones suffer a little while reproducing high tones. The main selling point of the earphone is its long-lasting battery. Calls are not that great but get the job done. The IPX4 certification and the warranty just add to the sweetness of the deal that Redmi is offering.

Some songs referenced in the Redmi SonicBass Wireless Earphones review:

Spotify Setting during the test:

Streaming Quality: Very High
Normalization: Off
Volume Level: Quiet

Redmi SonicBass Wireless Earphones Review: Pros & Cons

Pros:

Long-lasting battery life
Lightweight
Decent performance for a budget earphones
Dual Bluetooth connection
IPX4 rating
Six months warranty

Cons:

The neckband gets displaced on heavy movement.
The mic is not that great
No charger in the box
Micro USB charging connection

Samsung announces “Bada Dashain, Big Dhamaka” offer for the festive season

Samsung

GadgetByte

-

October 4, 2020

0

Samsung announces “Bada Dashain, Big Dhamaka” offer for the festive season

With the festive season right around the corner, Samsung has announced the “Bada Dashain, Big Dhamaka” campaign. The bumper prize here is the Renault Duster SUV. Keep reading to learn more about this offer from Samsung.

Samsung “Bada Dashain, Big Dhamaka”

The offer is valid from October 2 to November 17. Any new purchase of Samsung smartphone or tablet within the offer period is eligible for the Lucky Draw. Customers need to SMS the device’s Serial Number to 31003. To check the serial number of the device, you can either dial *#06# or check the “About Phone” option under the device’s Setting. Users will receive a confirmation of participation upon successful registration.

The thing to note here is that a single mobile number can only be used to register a maximum of two devices. Only devices bought from authorized retailers and online platforms are eligible. Similarly, participants should keep the device’s VAT bill, warranty card, and invoice safely as these documents will be used to verify the winners. You can also read the terms and conditions of the offer on Samsung’s official Facebook page.

Prizes

Under the offer, there will be a total of sixteen weekly winners. These weekly winners will be announced on Samsung’s Facebook page. The lucky draw will be held on October 8th, October 15th, October 22nd, November 5th, and November 12th. Ten lucky winners will win Galaxy Note 20. Similarly, five of these 16 lucky winners will be eligible to win Honda Hornet 160 R. Also, one participant will win the Renault Duster SUV as the bumper prize. However, it won’t be among the 16 weekly winners. Samsung Nepal will conduct the bumper lucky prize draw on November 19th.

Also Read: Samsung smartphones price in Nepal [Updated]

Validity Period

Samsung “Bada Dashain Big Dhamaka” is valid from October 2 to November 17.

Promotional Campaign	Validity Period
Samsung “Bada Dashain, Big Dhamaka”	October 2 – November 17

Check out our review of Samsung Note20 Ultra.

Nokia 2.4 launched in Nepal: Entry-level Android One smartphone

Nokia

GadgetByte

-

October 4, 2020

0

Nokia 2.4 launched in Nepal: Entry-level Android One smartphone

HMD Global has officially unveiled its latest entry-level smartphones, the Nokia 2.4. In this post, we will be taking a look at the specs, features, official price, and availability of Nokia 2.4 in Nepal.

Nokia 2.4 Overview

Design and Display

While the chassis of the Nokia 2.4 is made up of metal, its shell is composed of polycarbonate material. With the 3D Nano textured finish, the company claims that the phone will feel both secure, solid, and comfortable in hand. It features a taller 6.5-inch HD+ display with a tall aspect ratio of 20:9. Compared to Nokia 2.3, it has a bigger screen, taller aspect ratio, and slightly better resolution. It features a notch on top to house the front camera. The Nokia branding is on the bottom chin of the display.

At the back, the dual-camera setup is enclosed inside a pill-shaped camera module, accompanied by a flash. Just below the module, resides a physical capacitive fingerprint scanner for biometrics. Similarly, users can choose between three color options – Dusk, Fjord, and Charcoal

Performance and Memory

The device is powered by MediaTek’s Helio P22 chipset. It’s an octa-core processor with eight Cortex A53 cores. There was quad-core Helio A22 in the Nokia 2.3. It is available in two memory configurations. The base variant features 2GB of RAM coupled with 32GB of storage while the top model brings 3GB of RAM with 64GB of internal storage. In either variant, the internal storage can be expanded up to 512GB.

Nokia 2.4 ships with near-stock Android 10. Since the phone falls under the Android One program, Android upgrade up to Android 12 is guaranteed. Similarly, it is also eligible for three years of monthly security updates.

Also, read our review of the Nokia C2.

Camera

Nokia 2.4 flaunts a dual-camera setup on the back. The 16MP primary camera uses a 5P lens with an aperture of f/2.2. The upgrade in the image processing means Nokia 2.4 now has a dedicated Night mode backed by AI algorithms. The primary camera is accompanied by a depth sensor of 2MP. With Portrait Editor, users can choose from the custom shaped and blurred background after the shots have been taken. The two sensors are inside the pill-shaped camera bump alongside the LED flash. On the front, there is a 5MP selfie camera with an aperture of f/2.4.

Rest of the specs

Nokia 2.4 features a massive non-removable battery of 4,500mAh. As per the company, it should last up to 2 days of usage on a single charge. For battery efficiency, there is an AI-assisted Adaptive Battery feature. It identifies your favorite apps and prioritizes power for such apps. In addition to the capacitive fingerprint sensor, users can also use the AI Face Unlock.

Nokia 2.4 Specifications:

Body: 165.85 x 76.30 x 8.39-mm; 189 gm
Display: 6.5-inches panel
Resolution: HD+(1600 x 720 pixels); 20:9 aspect ratio
Chipset: MediaTek Helio P22; TSMC 12nm FinFET process
Processor: Octa-core (8 x 2.0GHz Cortex A53)
GPU: IMG PowerVR GE8320
RAM: 2/3GB
Storage: 32/64GB (expandable up to 512 via a microSD card)
Software & UI: Android 10
Rear Camera: Dual-camera;
– 13 MP, f/2.2 primary shooter
– 2MP depth sensor
– Single LED flash
Front Camera: 5MP, f/2.4 aperture
Security: Face-unlock, Fingerprint scanner
Audio: 5mm headphone jack, FM Radio
Connectivity: Dual-SIM (Nano), MicroSD card, WiFi 802.11 b/g/n, Bluetooth 5.0, GPS/AGPS/GLONASS/Beidou, MicroUSB 2.0, OTG, NFC
Battery: 4500 mAh AI-assisted Adaptive battery
Colors: Charcoal

Nokia 2.4 Price in Nepal and Availability

The official price of Nokia 2.4 in Nepal is Rs. 12,999. This price is for the 2GB RAM and 32GB storage variant. It is available for purchase from the nearest retail shop all over Nepal.

Smartphone model	Old Price	New Price in Nepal
Nokia 2.4	NPR 14,599	NPR 12,999

Check out our review of the Nokia 2.3.

Samsung Galaxy A21s gets a price drop in Nepal

GadgetByte

-

October 4, 2020

0

Samsung Galaxy A21s gets a price drop in Nepal

Samsung has officially dropped the price of Galaxy A21s in Nepal. It is now Rs. 2500 cheaper as compared to its official launch price. It is the cheapest Samsung phone with a quad-camera setup and a new Exynos 850 chipset.

Samsung A21s Overview

Design and Display

Samsung A21s features an HD+ Infinity-O display with a diagonal length of 6.55-inches. The screen size is the same as that of Galaxy A21, and both of them feature TFT LCD panel. It also bears a punch-hole on the top left corner to house the selfie camera.

The back panel has a gradient finish, which surely looks more premium than that of the Galaxy M-series lineups. The phone is also relatively lightweight and easier to hold too.

Also Read: Samsung Mobile Price in Nepal [Updated]

Processor and Memory

The Galaxy A21s is powered by an Exynos 850 SoC. It is the first mid-range smartphone from Samsung to come with the new 8nm architecture. This lower process will attribute to energy efficiency and better performance. It is paired with 3/4/6GB of RAM with either 32GB or 64GB of internal storage. But, only the 4GB and 64GB variant is available in the Nepali market.

Camera

The Galaxy A21 comes with quad rear camera setup. There’s a 48MP primary camera accompanied by 8MP ultra-wide sensor, a 2MP macro sensor, and a 2MP depth sensor. The front houses a 13MP selfie camera.

Battery and Others

In terms of battery, you get a large capacity of 5,000mAh. It also has the support of 15W fast charging. For biometrics, the device comes with a capacitive fingerprint sensor mounted on the rear panel. It is available in four color options – Black, Blue, Red, and White.

Samsung Galaxy A21s Specifications

Dimensions: 75.3 x 163.7 x 8.9 mm
Weight: 192g
Display: 6.5-inch HD+ Infinity-O display
Processor: Octa-Core Exynos 850 processor (Quad 2.0GHz + Quad 2.0GHz)
RAM: 3/4/6GB
Storage: 32GB / 64GB, expandable via micro SD card
OS: Android 10 with Samsung One UI
Rear Camera: Quad-camera;
– 48MP primary shooter (F2.0)
– 8MP ultra-wide-angle lens (F2.2)
– 2MP macro lens (F2.4)
– 2MP, depth sensor (F2.4)
– Single LED flash
Front Camera: 13MP
Others: 3.5mm audio jack, fingerprint sensor, micro-USB, Samsung Knox
Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 5, GPS + GLONASS
Battery: 5,000mAh with 15W Fast Charge (Type C)
Colors: Red, Blue, Black, White

Galaxy A21s Color Options

1 of 4

Samsung A21s Price in Nepal & Availability

The Samsung Galaxy A21s was launched in Nepal for a price of Rs.24,999. However, Samsung Nepal is offering the phone at Rs. 22,499, which is Rs. 2500 off from its launch price.

Model Name	Price in Nepal	Availability
Samsung Galaxy A21s (4+64GB)	Rs. 22,499	Mobile Sops all over Nepal

Check out our review of Samsung Galaxy A21s:

OnePlus 8T with 65W fast charging tipped to launch next month

GadgetByte

-

October 4, 2020

0

OnePlus 8T with 65W fast charging tipped to launch next month

After a lot of rumors and speculations, OnePlus finally confirmed that another flagship smartphone is on the way. The Chinese smartphone company confirmed via its official social media handles that the next device will be OnePlus 8T. It will be the third device in the OnePlus 8 series. Let’s learn more about the rumors, leaks, specs of the upcoming OnePlus 8T.

OnePlus 8T Rumors Roundup

Design and Display

Thanks to renders by a well-known tipster, OnLeaks, we now have an idea how the third member of the OnePlus 8 series will look like. The front of the device looks similar to the OnePlus 8 Pro. The leaked render suggests that the OnePlus 8T will sport a punch-hole display with a diagonal length of 6.5-inch. Like the other two devices in the series, the display here will be an AMOLED panel and will support a 120Hz refresh rate.

At the back, OnePlus has gone with a rectangular camera module. The shape and the position of the module make it look like the one Samsung uses in its premium smartphones; kinda like the one on Galaxy S20+.

Performance and Camera

In terms of performance, the OnePlus 8T will feature Snapdragon 865 chipset. Qualcomm will bundle the chipset with Snapdragon X55 modem, so the support for 5G connectivity is guaranteed. However, given the existence of the slightly more powerful Snapdragon 865+, the decision to go for SD 865 feels a little unsettling. The device will be available in two memory configurations. The base variant will have 8GB RAM paired with 128GB whereas the top-of-the-line variant bumps the RAM and internal storage to 12GB and 256GB, respectively.

OnePlus 8T will flaunt a quad-camera setup with a 48MP primary camera. The primary camera will support both OIS and EIS stabilization for video recording. It will be accompanied by a 16MP ultra-wide camera with a 119-degree Field of View. The setup will also include a 5MP macro camera and depth sensor of 2MP. The single circular cut-out on the front of the device will enclose a 32MP sensor.

Read our review of the OnePlus Nord.

Rest of the Specs

The whole setup will be backed by a 4,500mAh battery. OnePlus 8T is also reported to support 65W fast charging – which is a big leap from the company’s 30W Warp Charge 30T. It will be the first device to come shipped with OxygenOS 11 based on Android 11 out-of-the-box. Other feature includes 5G connectivity (SA/NSA), 4G, Wi-Fi 6, and Bluetooth 5.1.

OnePlus 8T Specifications:

Display: 6.5-inches Fluid AMOLED panel; 120Hz refresh rate; Gorilla Glass 6
Resolution: FHD+(1080 x 2400 pixels)
Chipset: Qualcomm Snapdragon 865; 7nm+ Mobile Platform
CPU: Octa-core (1×2.84 GHz Kryo 585 & 3×2.42 GHz Kryo 585 & 4×1.8 GHz Kryo 585)
GPU: Adreno 650
RAM: 8 / 12GB LPDDR5
Storage: 128 / 256GB UFS 3.0
Software & UI: Android 11 with OxygenOS 11 on top
Rear Camera: Quad-camera;
– 48MP, primary shooter, OIS, EIS
– 16MP ultra-wide shooter, 116º FOV
– 5MP macro lens
– 2MP depth lens
Front Camera: 32MP
Security: Optical in-display fingerprint scanner
Audio: Dual stereo speakers with Dolby Atmos
Connectivity: Dual Nano-SIM slot, WiFi 802.11 a/b/g/n/ac/ax (dual-band), Bluetooth 5.1, USB Type-C
Battery: 4500mAh; 65W fast charging

OnePlus 8T Pro Launch Date

Both OnePlus India and Amazon India already have a dedicated page for OnePlus 8T up on their site. According to MySmartPrice, the company will unveil the OnePlus 8T via an online event on 14th October.

Smartphone Model	Launch Date (Expected)
OnePlus 8T	14th October 2020

Check out our long-term review of the OnePlus 7T.

Xiaomi Mi 10T Lite launched: A dream midrange phone?

GadgetByte

-

October 2, 2020

0

Xiaomi Mi 10T Lite launched: A dream midrange phone?

We saw the launch of the Mi 10T series recently. It featured two excellent flagship-level smartphones. However, the series also contains a mid-ranger that seems superb. Yup, I am talking about the Mi 10T Lite. It does not have the same specs as that of the flagship 10T and 10T Pro, but it is no slouch either. It features the recently launched Snapdragon 750G processor and a host of other specs that place it above the mid-rangers currently available in the market.

Mi 10T Lite Overview

This device comes with a toned-downed yet capable list of specifications than the Mi 10T and 10T Pro. The device shares a similar design to the recently launched POCO X3. It sports a 6.67-inch IPS LCD screen, however, it only offers a 120Hz refresh rate. It supports HDR10 and is protected by Corning Gorilla Glass 5. The screen has a punch-hole to house a 16MP selfie camera.

It is the first smartphone in the world that is powered by the Snapdragon 750G 5G chipset. It is coupled with 6GB LPDDR4 RAM and up to 128GB UFS 2.1 storage. However, unlike the 10T and 10T Pro, here, you do have an option to expand the storage capacity. The phone packs in a 4820mAh battery with 33W fast charging.

In the camera department, the device features a quad-camera setup on the back. It includes a 64MP primary sensor, a 13MP ultra-wide lens, a 2MP macro lens, and a 2MP depth sensor.

Mi 10T Lite Specifications:

	Mi 10T Lite
Display	6.67-inch FHD+ LCD with 120Hz Adaptive Sync, HDR10 support, and 84% NTSC color gamut
Rear Camera	Quad, 64MP, f/1.89 + 8MP ultra-wide, f/2.2 + 2MP macro, f/2.4 + 2MP depth, f/2.4
Front Camera	16MP, f/2.45
Processor	Snapdragon 750G
GPU	Adreno 619
Software	Android 10 with MIUI 12 on top
RAM	6GB LPDDR4x
Storage	64GB, 128GB UFS2.1
Battery	4820mAh, 33W fast charging
Connectivity	5G, dual 4G VoLTE, Wi-Fi, NFC,
Security	Fingerprint scanner (side-mounted), face unlock

Mi 10T Lite Price & Availability in Nepal [Expected]

The two variants of the Mi 10T Lite, 6/64GB, and 6/128GB are priced at €279 and €329 respectively. It will become available from October 14. As for Nepal, we can expect the 6/128GB variant to launch in Nepal for a price of Rs. 45,000.

Xiaomi Model Name	Price in Nepal (Expected)
Mi 10T Lite (6/64GB)	NPR. 39,000
Mi 10T Lite(6/128GB)	NPR. 45,000

Google Pixel 4a 5G launched with Pixels 5’s internals and a cheaper price tag

5G
Google

GadgetByte

-

October 1, 2020

0

Google Pixel 4a 5G launched with Pixels 5’s internals and a cheaper price tag

After the multiple delays, Google finally launched the Pixel 4a in August. And now the company has released another variant of it with the 5G connectivity. In Google’s word, the company has put the G in the 5G. Let’s check out the specs, features, expected price, and availability of Pixel 4a 5G in Nepal.

Pixel 4a 5G Overview

Though it is supposed to be the 5G variant of the 4a, the Pixel 4a 5G packs almost the same internal as the slightly more premium Pixel 5. Thus, it is more of a cheaper alternative to the Pixel 5 5G.

Design and Display

With a screen size of 6.2-inch, the Pixel 4a 5G is bigger than both Pixel 4a and Pixel 5. Additionally, the FHD OLED panel on the 4a 5G falls short on pixel density compared to the other two. Depending on the 5G band that it supports, the device weighs between 168g and 171g. While it has Pixel’s 5 HDR and 24-bit depth support, the screen on the 4a 5g is not protected by Gorilla Glass 6 and instead settles for Gorilla Glass 3. Similarly, unlike the aluminum body in Pixel 5, the Pixel 4a 5G sports a polycarbonate body.

At the back, all three devices look the same because of the placement of the square bump, physical fingerprint sensor, and the Google logo. However, the arrangement of the camera and flash is different on the Pixel 4a 5G compared to the other two.

Performance and Memory

Under the hood, Pixel 4a 5G packs the same Snapdragon 765G as the Pixel 5. It is certainly more powerful than the 730G in the Pixel 4a. The 5G connectivity has been made possible because of the integrated 5G modem in the 765G. It can support both the slower sub-6 network as well as the faster mmWave 5G network. However, the latter option is likely to be limited to certain markets. Similarly, the graphics are handled by Adreno 620. It is available with 6GB LPDDR4x RAM and 128GB of internal storage.

Camera

Here, the 4a 5G features the camera setup as the Pixel 5. The 12.2MP primary camera is the same in all three devices actually. It supports dual-pixel phase detection autofocus. Similarly, it has OIS and EIS for smoother video recording. The 16MP ultrawide camera is actually an upgrade to the 4a’s camera setup. It offers a 107-degree Field of View and can record 4K videos at up to 60fps. The front camera comes with an f/2.0 aperture and fixed focus. It is capable of recording 1080p videos at 30fps.

Rest of the specs

Pixel 4a 5G’s 3885mAh battery is actually smaller than that on the Pixel 5. It comes with an 18W charger but there is no wireless charging as in Pixel 5. It has the Titan M module that secures the device from external threats. The device runs on the latest Android 11. Similarly, the phone is guaranteed three years of major OS upgrade and security update. Along with the stereo speaker, it also has the 3.5mm headphone jack for the audiophiles.

Google Pixel 4a 5G Specifications

Body: 6.1x 2.9 x 0.3-inches; Polycarbonate body, 168/171gm
Display: 6.2-inches OLED panel; HDR; Full 24-bit depth
Resolution: FHD+ (2340 x 1080 pixels); 19.5:9 aspect ratio
Chipset: Snapdragon 765G (7nm Mobile Platform)
CPU: Octa-core (1×2.4 GHz Kryo 475 Prime & 1×2.2 GHz Kryo 475 Gold & 6×1.8 GHz Kryo 475 Silver)
GPU: Adreno 620
RAM: 6GB LPDDR4x
Storage: 128GB UFS 2.1
Software & UI: Android 11
Rear Camera: Dual-camera;
– 12.2MP, f/1.7 primary shooter; 1.4µm; Dual Pixel PDAF, OIS+EIS
– 16MP, f/2.2 ultra-wide lens; 1.4µm; 107˚ FOV
Front Camera: 8MP, f/2.0 lens; 1.12µm; Dual Pixel PDAF
Security: Fingerprint Scanner (rear-mounted); Titan M security module
Audio: Stereo Speakers, 3.5mm headphone jack, AptX, APtX HD, LDAC
Connectivity: 5G (sub-6 / sub-6+mmWave), Dual-band WiFi 802.11 a/b/g/n/ac 2×2 MIMO, Bluetooth 5.0+LE, GPS/GLONASS/GALILEO/QZSS, NFC, USB 3.1 Gen 1 Type-C,
Battery: 3885mAh; 18W fast charging

Google Pixel 4a 5G Price in Nepal and Availability

Google Pixel 4a 5G is listed in the Google Store with a price tag of $499. While it won’t be launched officially here in Nepal, Google Pixel 4a 5G might be available through unofficial channels for a price of NPR 70,000.

Smartphone Model	Price in the US	Price in Nepal (Expected)
Google Pixel 4a 5G	$499	NPR 70,000

Check out our review of the Nokia 5.3.

Google Pixel 5 with Snapdragon 765G, 90Hz display launched for $699

Google

GadgetByte

-

October 1, 2020

0

Google Pixel 5 with Snapdragon 765G, 90Hz display launched for $699

Google has finally unveiled the latest smartphone under its Pixel lineup of smartphones. One biggest change on Pixel 5 is its upper-midrange SoC with 5G connectivity, which is quite different from what we’ve seen Google do throughout the years. Because of this, it falls behind when compared to the specs of flagship devices from other brands. Let’s take a look at the specs, features, expected price, and availability of Google Pixel 5 in Nepal.

Google Pixel 5 Overview

Design and Display

The new Google Pixel 5 looks more like the cheaper Pixel 4a than its predecessor. It sports a 6.0-inch OLED panel. The FHD+ panel has a pixel density of 432 PPI and an aspect ratio of 19.5:9. While the flagships in 2020 have already transitioned to a smoother 120Hz refresh rate, Google is still stuck with the 90Hz. Pixel 5’s display comes with support for HDR and full 24-bit color depth. If you remember, the Pixel 4 had a top bezel. It has been replaced with a punch-hole in the Pixel 5. This means the Motion Sense-powered 3D Face Unlock feature is no longer there.

Thus, Google has included a fingerprint sensor at the back called “Pixel Imprint”. The physical fingerprint scanner seems like an odd choice considering the company could’ve easily gone with an under-display implementation instead.

Performance and Memory

Unlike flagships from other major smartphone manufacturers, Google has ditched the Snapdragon 865 for less-powerful Snapdragon 765G. What it means is that the performance of the Pixel 5 will be comparable to last year’s Pixel 4. It can even underperform if the multi-core performance is taken into account.

Still, the 765G adds a new feature to the Pixel 5 which wasn’t there in its predecessor – the integrated Snapdragon X52 modem for 5G connectivity. Google says it has designed the device to be used with its Fi service. What this means is that Pixel 5 can intelligently switch between the multicellular network and Wi-Fi connections for the best coverage and bandwidth saving. The phone is available with 8GB of LPDDR4x memory and 128GB of internal storage.

Camera

Google has also made some changes to the camera setup. Though the 12.2MP primary camera has remained intact, it has replaced the 16MP telephoto lens with an ultra-wide sensor. So, it is logical to not expect Pixel 4-like zooming here. The Night Sight mode in Pixel 5 not only helps users to capture better low-light pictures but also takes portrait shots. While capturing portraits, Pixel will automatically drop extra illumination. Users can also adjust the lighting later. Similarly, Google has also improved HDR performance.

The primary camera comes with dual-pixel phase-detection AF. It also supports both OIS and EIS for stable video recording. The ultra-wide camera sensor has a 107-degree Field of View. It is also capable of recording 4K videos at up to 60FPS. The 8MP camera on the front can record 1080p videos at 30fps.

Rest of the specs

Pixel 5 packs in a moderate battery of 4080mAh (typical) capacity. With Extreme Battery Saver turned on, the battery can last up to 48 hours. It also supports wireless, and reverse wireless charging. The device also features the Titan M security module.

Google Pixel 5 Specifications:

Body: 5.7 x 2.8 x 0.3-inches; Aluminum body, 151gm; IP68 certification
Display: 6.0-inches OLED panel; HDR; Always-on Display; 432 PPI; 90Hz Refresh Rate; Corning Gorilla Glass 6; Full 24-bit depth
Resolution: FHD+ (2340 x 1080 pixels); 19.5:9 aspect ratio
Chipset: Snapdragon 765G (7nm Mobile Platform)
CPU: Octa-core (1×2.4 GHz Kryo 475 Prime & 1×2.2 GHz Kryo 475 Gold & 6×1.8 GHz Kryo 475 Silver)
GPU: Adreno 620
RAM: 8GB LPDDR4x
Storage: 128GB UFS 2.1 (fixed)
Software & UI: Android 11
Rear Camera: Dual-camera;
– 12.2MP, f/1.7 primary shooter; 1.4µm; Dual Pixel PDAF, OIS+EIS
– 16MP, f/2.2 ultra-wide lens; 1.4µm; 107˚ FOV
Front Camera: 8MP, f/2.0 lens; 1.12µm; Dual Pixel PDAF
Security: Fingerprint Scanner (rear-mounted); Titan M security module
Audio: Stereo Speakers, AptX, APtX HD, LDAC
Connectivity: 5G, Dual-band WiFi 802.11 a/b/g/n/ac 2×2 MIMO, Bluetooth 5.0+LE, GPS/GLONASS/GALILEO/QZSS, USB 3.1 Gen 1 Type-C,
Battery: 4080mAh, wireless charging, wireless reverse charging

Google Pixel 5 Price in Nepal and Availability

Google Pixel 5 will go on sale in the US from October 29 at a price of $699. While it won’t be launched officially here in Nepal, Google Pixel 5 might be available through unofficial channels for a price of NPR 90,000.

Smartphone Model	Price in the US	Price in Nepal (Expected)
Google Pixel 5	$699	NPR 90,000

Check out our review of the Nokia 5.3.